DeltaT provides a PC interface for the Planer range of controlled rate freezers allowing you to rapidly develop and maintain profiles on your PC and view freezing progress in real time.
DeltaT can be used to store files (only limited by the size of the hard drive) on your PC as to well as to print using a standard printer for manual record keeping.
Calibration can also be carried out (by authorised personnel) using the DeltaTiQ software, which meets regulations for temperature controlled equipment.
DeltaT-iQ extends a standard DeltaT installation and provides two additional tools: Calibration and Qualification. These new features are designed to help users with their GMP requirements and allow users to derive calibration information and quantifiable performance data from freezer runs; these data can be used to compare different runs. To upgrade DeltaT to take advantage of these tools, you will need to purchase a licence for DeltaT-iQ and then register the product as described in the instructions. Finally, to add the tools to the application, you will need to download the DeltaT-iQ ini file and copy this to your Deltat folder.
Download the upgrade file to DeltaTiQ here
Download DeltaT software here
Download the specification sheet here
If you wish to install DeltaT-iQ you must register with a DeltaT-iQ installation ID.
1. Download DeltaT here and run file to begin installation of DeltaT. Follow on-screen instructions to install DeltaT. Once complete, DeltaT Lite is installed.2. To register DeltaT/DeltaT-iQ software, you need to:a. Send the number shown in the Installation ID field and also your name or company name to which the software is to be licensed to
NB. choose the name carefully as this cannot be changed. Planer will return a software user key. While you wait for your user key, select Cancel to return to the main screen. The Installation ID is generated automatically during installation and is different for every PC. Installing the software on a different PC will generate a different site code.b. Once you receive the user key select Register, again if necessary and enter the key in the User key field. This number will work only on the PC that generated the site code.c. Enter the name you provided when you requested the key in the User name field.d. Select Register.You now have a registered version of DeltaT/DeltaT-iQ, to upgrade to DeltaT-iQ:3. If you are using DeltaT-iQ you must copy the DeltaTiQ.ini file into installation folder (generally C:\Program Files\DeltaTV6)Download the DeltaTiQ.ini file here This will allow access to the additional DeltaT-iQ features.
The Planer TeamCOMPANY REGISTRATION NO.651504 REGISTERED IN ENGLAND AT THE ABOVE ADDRESS
© Planer, All rights reserved. Company no. 651504 registered in England. Design: Transmedia